Loading the page
Loading the page
IHTEFAQ MOTORS LTD Outer track rod end pair, left and right, in Steering. A left and a right outer track rod end, each with its castellated nut and split pin. Price £34.99 including VAT.
Part no. IM-TRE-OUTER-PAIR
Outer track rod ends are the ball joints between the track rods and the steering arms of the front wheels. A worn joint gives play in the steering, felt as a knock over bumps, loose steering or a car that wanders.
This pair replaces both sides in one order: a left and a right rod end, made as mirror images. Each has a cast body with a curved arm, a ball joint protected by a white dust cap, a threaded stud for the steering arm and an internal thread at the end of the arm for the track rod.
Fit depends on the vehicle. Contact us with your registration number before you order and we will confirm these rod ends suit your car.
2 × outer track rod end: one left and one right, made as mirror images, each with its ball joint, white dust cap and threaded stud.
2 × castellated nut: one on the stud of each rod end, to hold it in the steering arm. Its slots take the split pin.
2 × split pin: one for each castellated nut. It passes through a slot of the nut and the hole in the stud, so the nut cannot work loose.
Price £34.99
inc. VAT
In stock
Estimated delivery: Fri 20 to Mon 23 NovFri 20 to Mon 23 November
Standard delivery
Replace a track rod end when its ball joint has play or its dust cap is torn. Typical signs are a knock from the front over bumps or when turning, steering that feels vague or pulls to one side, and front tyres worn on their inner or outer edge.
Excess play in a steering ball joint is a reason for failure at the MOT test. Replacing both sides together means the wheel alignment is set once.
Before removing the old rod end, count the turns needed to unscrew it from the track rod. Screw the new one on by the same number of turns and tighten the lock nut: the front wheel toe stays close to its old setting.
Pass the stud through the steering arm and tighten the castellated nut to the torque given by the vehicle maker. If no slot lines up with the hole in the stud, turn the nut on to the next slot, never back, then fit the split pin and bend its legs over.
Have the wheel alignment checked and set straight after fitting. Wrong toe makes the car pull and wears the front tyres quickly. Steering parts are safety critical: if you are unsure, have them fitted by a garage.
| In the box | 2 outer track rod ends (left and right), 2 castellated nuts, 2 split pins |
|---|
Choose your vehicle to see only the parts that fit
Choose your vehicle to see only the parts that fit